PFD006 Almix 150 TPH STATIONARY PARALLEL FLOW PLANT
150 TPH STATIONARY PARALLEL FLOW PLANT Late model Almix Parallel Flow Drum Plant – Stationary
Cold Feed Bins: 4 total; Model 6626; Serial #823-A-CF8
• 8’ x 12’ x 10’T Bin Size- 2’ Leg Extension – Total Height 12’
• 3HP 1720 Sew Eurodrive Motor with Reducers – Direct Drive
• 9’ x 30” Wide Feeders with 24” Belt and 20” Opening
• Dual Single 3’ x 4’ Scalping Screens (2 Bins Feed Each)
• No Flow Paddles
• System Tachometers Model 1405
• Cutler Hammer SUX9000 VFD Drives in Enclosure
• Bin Dividers
• Total Measurement = 47’ L x 12’ W
Aggregate Collector Belt:
• 24” Belt x 65’ Long
• 5HP 1745RPM Techtop Motor with Dodge TXT325AS Reducer – Belt Driven
• Systems Style Weigh Bridge
• Flexco Scrapers
Aggregate Calibration/Reject Conv.
• 24” Belt x 24’ Long
• Unable to get HP on Motor
Slinger:
• 2HP 1720 Sew Eurodrive Motor with Reducer
• 18” Belt
• 9’6” Long
Burner: Was being ran on Natural Gas
• Hauck Burner SJ420
o SJO4200G-112-01-09-1-00; PRN 28985
• 40HP Blower Motor with 3,350 RPM
• Blower – TBA36-40-0-3; 2003045 SN#
Drum: Parallel Flow
• Drum Frame – 5’6” Wide x 33’6” Long
• Drum – 5’6” Wide x 26’6” Long
• 4 – Direct Trunnion Drive 10HP Sew Eurodrive Motor/Reducers
• 5” Tires; 6” Trunnions with Link Belt Bearings
AC Tanks/Hot Oil Heater:
• 1 Horizontal Tank Skidded – 7’ Wide x 31’ Long – Tank itself is 11’ Wide
• Coils are currently visible
• All piping intact
• 5HP 1740RMP AC pump motor with additional in-line pump
• 10HP 3520 Echtop Motor with in-line pump Recirculating Pump
• 15HP 1775RPM AC unloading pump
• 1 Hot oil heater with two temp control units and control panel
Drag:
• Single 2 ½” Drive Chain with 18” Slat
• OD of box – 26”; ID of box – 20” x 57’ Long
• 30HP 1765 RPM Motor with Dodge TXT7 GB Gearbox
Traverse:
• Single 2 ½” Drive Chain with 18” Slat
• Has two flop gates for mix control
• 19 ½” ID; 28” OD x 30’ Long
• Equipped with Whirligig
Batchers:
• 3 Each
• 4 x 4 size
• Bindicators for High and Low
• Single Cylinder per side with Dual Gates
Silos:
• 3 – 75 Ton capacity (2 are new)
• Dual Gates
• 13 ¾” W x 12 ½” Long Silo Legs
Truck Scale:
• B Tec Truck Scale and Load Cells
• 10’ W x 80’ L
Baghouse/Exhaust Fan/Dust:
• Dims 12’ x 12’ x 24 ½” T
• Pulse Jet Style
• 32” Exhaust Stack
• Baghouse Bags included
• 4’ Duct Work
• Dust Blower with 20HP 1700RPM Motor
• Dust Vane with 1HP Weg Motor coupled to an Encore Lubricator & Silencer
• Exhaust Fan 300 BC-SW 03-1777829-1-1
o 60HP Single Motor
• Weg EDP11 Control Unit with CFW-11 VFD Drive
Control House/Controls:
• 20’L x 9’T x 12’ W – Model #6626; SN#523-G-Contorl H
• Systems Control System
• Libra Load Out Controls
Notes:
• Brand New Burner on Preheater
• Brand New Drag Chain
• Rebuilt Mixing Chamber in Drum
• Brand New Baghouse Bags (has never been ran since change)
• New Tires on Drum
